Eurocopter UK Ltd hold maintenance approval to EASA Part 145 to support Eurocopter products from our bases in Oxford and Harwarden

Our team of Regional Engineers provide 24/7/365 engineering support for all of the UK and Ireland

• EASA Design Organisation Approval to Part 21 Section A, Subpart J: Ref. EASA. 21 J 015 (includes Flight Test as Part 3 of the Design Handbook)
• UK CAA Production Organisation Approval to Part 21 Section A, Subpart G. Ref. UK.21G.2063
• UK CAA Flight Test Organisation Approval for flight under "B" conditions under BCAR ref. No. DAI/8677/80
• UK CAA Continuing Airworthiness Management Organisation to EASA Part M. Ref. UK.MG.0303
• UK CAA Maintenance Organisation Approval to EASA, Part 145. Ref. UK.145.0124 - Ratings A3, B1, C5, C10 & C11
• UK CAA Maintenance Training Organisation Approval to EASA Part 147. Ref. UK.147.0041
• Approved by the UK CAA under the UK ANO 2005. Ref. AD/1942/05
• UK Ministry Of Defence Approval from the MoD Defence Procurement Agency, Director of Flying to conduct AvP67 Flying Operations
• Accreditation by BSI Management Systems to BS EN 9100:2003, AS9100 rev B, AS 9110:2003, AS 9120:2002, ISO 9001:2008
• FAA Approved Repair Station. Air Agency Certificate number XQ5Y196B
• UK CAA Type Rating Training Organisation Approval to JAR-FCL 2. Ref. UK/TRTO-959
• Turbomeca Approved Sevice Centre for Arrius 1 & 2 and Arriel 1 & 2 engines. Certifcate number 392-09

Eurocopter UK Ltd holds full EASA Part 21 Approval to design, manufacture and install modifications on any of the helicopters we sell. Our Design Department allows us to offer a wide range of certified and customised options for both new and used helicopters such as external equipment, pods, camera mounts, analogue to glass cockpit conversions and complex avionics. Installation is carried out in a dedicated hangar by a team of over 30 engineers supported by 2 test pilots, who are fully involved in the EASA clearance and certification process.

Customer service is as important to us as making sure we deliver your aircraft on time and to the agreed specification. We have Key Account Managers, allocated permanently to each customer, whose sole task is to act as your point of contact for all your requirements. As a company, we are committed to customer service, be it planning scheduled servicing, sourcing replacement parts or providing technical advice. As the main Eurocopter Service Centre, we additionally have one of our most experienced engineering managers dedicated to providing you with technical information, either from Oxford, or from other specialists within the Eurocopter Group. We regularly feed your comments back to Eurocopter as part of our product improvement service and pride ourselves on listening, innovating and responding to every new challenge you give us.

Dedicated to the Eurocopter range of light and medium helicopters, the mission of the logistics department is to support our customers both in the UK and overseas. Built around a multi-million pound stock holding, we aim to meet 85% of customer's demands from our existing stock. Customers making use of the Eurocopter UK Ltd Helicopter Maintenance Agreement benefit from the regular checks made of flying hour consumption and the pre-ordering of any scheduled replacement spares hence minimising down time.

An option taken up by many helicopter operators is a Helicopter Maintenance Agreement, paid quarterly, which covers all scheduled inspections, unscheduled rectification, the maintaining of techical records and the work required to obtain Certificate of Airworthiness renewal. As well as spreading out cash flow, we can help plan your scheduled checks to minimise operational disruption and provide you with the maximum aircraft availability.

In addition, we can offer a support by the hour agreement, which covers the cost of replacement parts and supplements the Helicopter Maintenance Agreement, which only covers labour. This provides separate options for engine parts, airframe components, avionics and autopilot or any mix to suit the customer.

Eurocopter UK Ltd is an approved EASA Part 147 training organisation for the AS365N3, EC120B, EC135 with Arrius 2B and EC135 with PWC 206. Regular courses for licensed engineers wishing to gain type qualification in categories B1 (airframe and engines) and B2 (avionics) are provided. The course content can be made customer specific if required. The Company also runs a Human Factors training course to meet the new engineering license requirements as well as the mandatory annual refreshers.

In addition Eurocopter UK Ltd also prides itself on its apprentice training scheme that has been running for over 20 years. Two apprentices are taken on each year to be trained up to licensed engineer standard which is generally achieve after 4/5 years.

pilot training